RJW Electrical
Consumer Unit Installation & House Rewiring
Consumer unit installation replaces or upgrades the home’s main electrical control equipment, while rewiring renews ageing cables and connections throughout a property. RJW Electrical helps homeowners and landlords assess requirements, plan compliant work and improve electrical safety across domestic properties.
20 Years’ Qualified, Accredited Consumer Unit & Rewiring Expertise
Consumer unit work covers more than fitting a new box. Existing circuits, earthing and bonding arrangements, cable condition and protective devices must be assessed so the replacement is suitable for the installation. Rewiring involves renewing affected cables and connections, followed by testing and certification.
RJW Electrical’s domestic work is carried out by fully qualified, insured and DBS-checked engineers. Projects are planned around the property’s existing wiring, intended electrical load and the extent of upgrading required, whether that means a consumer unit replacement or a wider house rewire.
Work is completed in line with the latest 18th Edition wiring regulations, with inspection and testing forming part of the process. This provides a documented basis for confirming that the completed installation has been assessed against applicable electrical requirements.
The Consumer Unit Installation and Rewiring Process
The process for consumer unit installation or house rewiring begins with understanding the property, its existing electrical system and planned demands. It then moves through preparation, controlled site work, inspection, testing, certification and handover.
- 01
Initial enquiry and property details
The process starts with basic information about the property, the type of electrical work required and any known concerns, such as outdated equipment, damaged accessories or frequent circuit problems.
- 02
Electrical assessment
The existing installation is reviewed to establish the condition and arrangement of the consumer unit, circuits, cables, earthing and bonding. For a rewire, this helps identify which parts require replacement and how the work will affect the property.
- 03
Scope and quotation
The findings are used to define the proposed work, including whether the requirement is a consumer unit replacement, partial rewire or full house rewire. The quotation should make clear what is included, which areas are affected and any preparation required.
- 04
Preparation before work starts
The work is planned around the property layout, existing wiring and intended electrical demand. Access requirements, affected rooms, fittings and the sequence of tasks are considered before site work begins.
- 05
Installation or rewiring on site
The engineer carries out the agreed electrical work, installing the new consumer unit or renewing the specified cables and connections. Work is managed systematically so circuits and associated components are dealt with as set out in the agreed scope.
- 06
Inspection and testing
After installation, the completed work is inspected and tested. Checks confirm that the relevant circuits, protective devices, earthing and connections have been assessed in accordance with applicable electrical requirements and the latest 18th Edition wiring regulations.
- 07
Certification and handover
The project is completed with the appropriate electrical documentation for the work carried out. The homeowner or landlord can then review what has been installed, understand any relevant recommendations and retain the certification for their records.
Compliance Evidence
RJW Electrical’s regional track record is supported by NAPIT, TrustMark and Electrical Safety Register membership, with documentation for completed work.
Practical Questions About Consumer Units and House Rewiring
How can I prepare my home for consumer unit installation?
Before work begins, the electrician should explain access requirements, affected rooms, likely interruptions, protection of furnishings, and how power will be managed safely while circuits are isolated, tested, and restored.
What happens if unsafe wiring is found during consumer unit replacement?
If unsafe wiring is discovered, the electrician should explain the defect, isolate affected circuits where necessary, recommend corrective work, and document limitations before testing and issuing certification for completed installation.
What certificate is provided after consumer unit installation?
After installation, the electrician should provide an Electrical Installation Certificate recording the work, inspection and test results. Where applicable, building regulations compliance documentation may also be supplied for future reference.
How disruptive is a house rewire?
Disruption depends on the property’s construction and wiring layout. A partial rewire affects fewer areas; a full rewire may require access beneath floors, within walls, and above ceilings during installation.
How long does consumer unit installation take?
Consumer unit installation times vary with circuit numbers, access, property layout and whether upgrades or replacement work is required. The electrician should confirm the planned sequence after assessing the installation.
Clear Standards for Consumer Unit and Rewiring Work
For consumer unit installation or house rewiring, clear communication should cover the proposed scope, relevant findings, testing and certification, so customers can compare quotations on what is actually included.
RJW Electrical’s approach includes careful preparation, controlled installation, connection checks and a professional finish, with documentation for completed work. This gives customers a practical record of the consumer unit upgrade or rewire.
Clear communication
The proposed consumer unit replacement or rewire is explained in plain language, including the work involved, relevant findings and the documentation provided afterwards.
Straightforward quotations
A clear quotation helps homeowners and landlords compare the required work, with no call out fee quote available for the proposed electrical project.
Planned attendance
Project arrangements are discussed in advance so access, work stages and any requirements affecting the property are understood before installation begins.
Standards-led workmanship
RJW Electrical applies the latest 18th Edition wiring regulations to domestic electrical work, with qualified engineers following a controlled installation process.
Considerate completion
Careful work practices support an orderly handover, leaving the customer with a clear understanding of the completed consumer unit or rewiring work.
Discuss Your Consumer Unit or Rewiring Requirements
To assess your consumer unit or rewiring requirements, contact RJW Electrical to discuss the property, planned changes and any known electrical issues. You can request clear advice and a quotation based on the work needed.
Explore