RJW Electrical
EV Charger Installation
EV charger installation connects a suitable home or workplace charge point to the property’s electrical supply. RJW Electrical helps domestic and commercial customers assess installation requirements, charger location and system suitability before choosing an experienced regional installer.
Comparing EV Charger Installation Options
Which EV charger installation option suits your property?
Home installations typically suit one charge point and simpler cable routes; workplace systems may require multiple chargers, load management and planned parking layouts, increasing design and installation requirements and coordination.
What affects the cost of EV charger installation?
Cost depends on charger specification, cable length, electrical capacity, consumer-unit changes, protective equipment, access, and any groundworks. A site assessment identifies these requirements before installation, testing and certification are priced.
What does a professional EV charger installation include?
A professional installation covers charger positioning, cable routing, dedicated protection, connection to the electrical supply, configuration, testing and certification. It should leave operating instructions and compliance records for property owners.
What electrical checks are needed before EV charger installation?
Pre-installation checks verify the earthing arrangement, supply capacity, protective devices, meter tails, bonding and cable route. The electrician also confirms the proposed charger location and required isolation arrangements for connection.
Should you choose a tethered or untethered EV charger?
Tethered chargers have a permanently attached cable, offering convenience but requiring careful cable storage. Untethered units use a detachable lead, providing a cleaner appearance and compatibility with different vehicle models.
Why Choose RJW Electrical for EV Charger Installation
RJW Electrical uses qualified, insured and DBS-checked engineers for EV charger installations, with work completed to the current 18th edition wiring regulations. This gives customers clear criteria when comparing installers.
NAPIT and Trustmark membership, plus the Electrical Safety Register, supports comparison of professional standards. RJW Electrical serves domestic and commercial customers in Sutton Coldfield, Walsall and surrounding Midlands areas.
20 years’ experience
Established in 2006, RJW Electrical brings two decades of experience to domestic and commercial EV charger installation projects.
No Call Out Fee Quote
Customers can compare the proposed installation requirements and quotation without a call-out fee being added for the quote.
Recognised professional standards
NAPIT membership, Trustmark scheme membership and inclusion on the Electrical Safety Register provide useful checks when comparing electrical contractors.
Compliance-led installation
Each installation is approached around the property’s electrical supply, charger position and system suitability, helping ensure the work is assessed on its technical requirements.
Regional Midlands coverage
RJW Electrical supports EV charger projects across Sutton Coldfield, Streetly, Walmley, Erdington, Lichfield, Aldridge, Walsall, Shenstone and surrounding Midlands areas.
Professional site standards
Fully insured and DBS-checked engineers provide a clear professional standard for customers arranging electrical work at homes, workplaces and commercial premises.
What a Well-Planned EV Charger Installation Includes
A well-planned EV charger installation should cover electrical protection, cable routing, mounting, controls and commissioning, not simply the charge point itself. The following features help compare quotations and identify a properly specified solution for your property or workplace.
Electrical Load Assessment
The existing supply should be assessed before selecting a vehicle charger. This helps identify available capacity, consumer unit requirements and any changes needed to integrate charging safely with the property’s electrical installation.
Suitable Cable Routing
Cable routes should be planned around the building, access points and parking position. A properly specified route can reduce unnecessary disruption while protecting the cable from damage and keeping the installation tidy.
Practical Charger Positioning
The charge point should be positioned where it is accessible for the vehicle, compatible with the available parking arrangement and suitable for the property. Mounting details and cable reach should be considered before installation.
Electrical Protection
A compliant installation requires suitable protective measures for the charger and its circuit. RJW Electrical designs the installation around the property’s existing equipment and the applicable 18th edition wiring regulations.
Testing and Commissioning
After installation, the system should be tested and commissioned so the charger, circuit and protective devices operate as intended. RJW Electrical provides electrical testing and inspection as part of its installation expertise, giving domestic and commercial customers clear documentation for the completed work.
Questions to Ask Before Choosing an EV Charger Installer
Before agreeing to an EV charger installation, ask each contractor how they assess the property, define the work included, demonstrate compliance, record test results, handle faults, and present the complete cost in writing.
- 01
Has the property been assessed properly?
Ask how the installer will assess the incoming supply, consumer unit, earthing, available capacity, cable route and proposed charger position. Domestic and commercial properties may have different requirements, so the recommendation should be based on the site rather than the vehicle alone.
- 02
What charger and installation method are suitable?
The contractor should explain why the proposed charge point suits the vehicle, electrical supply, mounting location and expected use. Confirm whether the quotation includes the cable route, protective equipment, mounting hardware and any necessary upgrades.
- 03
How will the installation comply with current requirements?
Ask which wiring regulations and technical requirements apply, and how the installation will address isolation, protection, earthing and any load-management needs. A qualified installer should be able to explain the compliance approach in clear terms.
- 04
What installation standards will be used?
Check how the cable will be protected, supported and routed, both indoors and outdoors, and how penetrations through walls or other building elements will be sealed. The finished work should be suitable for the property and installed with safe, durable workmanship.
- 05
What testing and inspection are included?
Ask whether the complete circuit and charge point will be inspected and tested after installation. The contractor should explain which tests will be carried out and how faults or required remedial work will be dealt with before the system is put into use.
- 06
Which certificates and records will you receive?
Confirm that the final documentation will identify the work completed, test results and any relevant certification or notification. Keep these records with the property documents, particularly if the installation is altered or inspected later.
- 07
What support and fault process is provided?
Ask who to contact if the charge point or installation develops a fault, and whether the contractor handles diagnosis, remedial electrical work or manufacturer-related issues. The responsibilities should be clear before the work starts.
- 08
What is included in the total price?
Request a written quotation that separates the charger, installation labour, cabling, protective devices, testing, certification and any possible additional works. Ask whether the quote includes a no call out fee quote and clarify how variations will be agreed before extra work is carried out.
- 09
Can the contractor demonstrate relevant competence?
Check the installer’s qualifications, insurance and experience with EV charging installations, as well as relevant registrations or memberships. RJW Electrical is a NAPIT member, part of the TrustMark scheme and listed on the Electrical Safety Register, with qualified and insured engineers.
Request a Tailored Quote from a Qualified, Insured and Accredited EV Installer
Discuss your vehicle charging requirements with RJW Electrical and request a tailored quotation. Qualified, insured and accredited engineers provide an accountable installation service, with appropriate assessment and clear scope for domestic or commercial premises.